Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - RoyC

Pages: 1 ... 5 6 [7] 8 9 ... 81
Which language do you want to use?

General Board / Re: Git support
« on: February 09, 2017, 11:27:08 am »
>> As was said (I think) on "The Sopranos", "forgeddaboudit".

No, it was '<something> Blue Eyes' with Hugh Grant, but I'll go with the intent.

General Board / Re: Image Assets in Generated Reports
« on: January 09, 2017, 11:21:31 am »
The Help directs you to creating a hyperlink in the element Notes or in a linked document. When a report is generated on the element, that hyperlink is actioned and the Image Asset's owned image is shown in the report.

General Board / Re: Configure BPSim - button Select Package disabled
« on: January 03, 2017, 10:00:13 am »
From the Help:

"Installing the Sparx Systems MDG BPSim Execution Engine and registering the licence for it are pre-requisites for accessing and using the built-in BPSim configuration facilities. Once you have set up a BPSim configuration, you can export the BPMN model along with its BPSim data in a standard form that can be consumed by the Sparx Systems BPSim Execution Engine and by any other standards-compliant BPSim engines."


"The MDG BPSim Execution Engine installer does not include JRE or JDK, therefore you must install JRE version 1.7 or higher to use the simulation and, if your BPSim Configuration contains any property parameters, you must also install JDK version 1.7 or higher."

This might be your problem.

I have asked our guru in this area about this, and his response is:

"The improved data modeling functionality introduced in EA v12 was targeted at modeling relational databases/tables, yet the objects you are attempting to model are not relational tables. Therefore if you were to change the stereotype of your objects from 'table' to something else - maybe 'dwtable' for data warehouse table - the default Class property screens (which give you direct access to all the properties that v10 did) would be shown instead of the data modeling ones."

Try that and let us know how you get on.

Well, some of the things listed on that page are templates, and some are MACROS. And unfortunately that is the only intelligent thing I can say about any of them. I will track down the person who looks after them and see what he suggests.

As I understand it, all the listed templates are 'standard' or system-supplied templates. You can't edit standard templates themselves. You can, however, use them as the base for your own customized templates.
Basically, the template editor helps you create and edit your own templates, largely based on copies of the standard templates.

The ribbon path is 'Code > Source Code > Configure > Code Template Editor'.

General Board / Re: Refresh all diagrams after updating style
« on: December 16, 2016, 09:49:14 am »
Yes. Your statement "the default appearance for the Checklist element, lite blue background color, client wants it white" suggests that you want to change all elements of type Checklist. Or are you working on all uses of a single element named 'Checklist'?
There are many ways in which you can apply and, in most cases, change the appearance of objects on diagrams. All the options listed here are described in greater detail in the Help.

To set the global appearance of all elements throughout a model, use the 'Preferences' dialog; select the 'Start > Workspace > Preferences' ribbon option, then select 'Standard Colors' and 'Diagram | Appearance' from the options tree. There is an option on the Appearance page called 'Use Element Group Style', which will apply a particular colour to each element of a particular type or extensions of that type. I don't believe that you can change that colour as a preference definition.

To set the appearance of all elements of a specific type (e.g. Checklist) so that they have the required appearance as you create them, define or edit that appearance on an element template diagram in a Template Package. Alternatively, and with the same effect, define the elements in a Profile.

To override the global appearance and define a default appearance of a specific element (e.g. MyAccount) on all diagrams on which it occurs, set the Default Appearance for that element; right-click on the element and choose the 'Appearance | Default Appearance' option.

To override the global or default appearances of a specific INSTANCE of an element (e.g. MyAccount just on the Class diagram 'PayThem') select that element on that diagram and use the options on the Style panel of the Layout ribbon.

Some elements of a specific type (e.g. elements of type Class) might have a customized appearance that is applied using a stereotype that either defines fill, border and font settings, or that actions a ShapeScript. To change the appearance of all elements of that type and that stereotype, edit the stereotype settings or the ShapeScript. A stereotype overrides all other appearance definitions.

You can also apply a standard or customized Theme to all of your diagrams, or to specific diagrams. I'm not sure how flexible that is in changing the fill colour of all elements of a specific type; I don't think it was designed for that purpose.

Yes, I can't see any reference to the keystore in the background document for the webinar:

This does, however, refer to installing the Cloud Service.

I'm not sure I have the right idea about what you need either, but if you avoid PowerPoint and stay within EA, would the Diagram Slide Show feature in Model Views be of any use to you?

That forum is for users to discuss things that might or might not be bugs, and to say that they have or have not reported them to Sparx Systems.

To actually report a bug to Sparx Support, submit a Bug Report using the 'Report a Bug' option in the 'Support' column at the foot of this page.

Bugs and Issues / Re: 1309: User Defined Boundary - how?
« on: December 05, 2016, 02:46:18 pm »
The description is in the Help now (I was on holiday when the spec came through) and will be published with the next release.  The text reads:

Shape Field
Click on the drop-down arrow and select from these options:
  • 'Rectangle' - if you have previously switched from the default rectangular border with sharp corners, return to that default
  • 'Rounded Rectangle' - set the shape to a rectangle with rounded corners
  • 'Ellipse' - set the shape to a circle or oval to accommodate the enclosed elements
  • 'User Defined' - enable setting drag-points on the border to create a custom shape (see the Customize System Boundary section); this option disables the 'Horizontal Swim Lanes' and 'Vertical Swim Lanes' fields

Customize System Boundary
When you have selected the 'User Defined' option in the 'Shape' field, you can add way-points to the sides of the System Boundary, to drag in a vertical or horizontal direction. This helps you to create shapes that enclose more-scattered elements than could be enclosed in a rectangle or ellipse.
To set a way-point on an edge:
  o  Ctrl+click on the edge
To clear a way-point:
  o  Ctrl+click on it
To move a way point:
  o  Move the cursor onto it until it changes to an 'up-down' arrow or 'left-right' arrow, and move the way-point
      in the appropriate direction; the boundary is orthogonal, maintaining horizontal and vertical lines during

Suggestions and Requests / Re: Find and delete orphanded items
« on: November 17, 2016, 02:26:23 pm »
It is also not a good idea to delete everything on the Find Orphans report without knowing exactly why it is an orphan. As several of you have pointed out many times, diagrams are just a human-support mechanism to help you visualize an aspect of your model, and you could - if you felt so inclined - develop part or all of your model without using diagrams at all.

@hfrmobile - what documentation are you referring to? As far as I can see, the release 13 Help is up to date; where did you find the not-updated material?

Bugs and Issues / Re: Publish to Joomla! failed
« on: November 15, 2016, 09:50:45 am »

Pages: 1 ... 5 6 [7] 8 9 ... 81