Author Topic: Long response times (Read 4683 times)

Michel777 · « **on:** October 18, 2013, 08:21:19 pm »

Hi,

opening an element takes about 4 seconds. Locally, embenden installation.

what to do to improve it?

Thanks,

Michel

qwerty · « **Reply #1 on:** October 18, 2013, 09:04:36 pm »

You mean you have an EAP and dbl-click takes 4 seconds to open the properties?

q.

Michel777 · « **Reply #2 on:** October 18, 2013, 09:22:13 pm »

qwerty · « **Reply #3 on:** October 18, 2013, 09:33:36 pm »

Is the EAP local on your machine or somewhere on a share?

q.

Michel777 · « **Reply #4 on:** October 18, 2013, 09:48:41 pm »

Hi,

the EAP is local and the System / HW is well dimensioned.

Michel

Stefan Bolleininger · « **Reply #5 on:** October 18, 2013, 10:08:22 pm »

Hi,

Are you using some Add-ins? If Yes, deaktivate them for testing purpose :-)

Regards

Stefan

Michel777 · « **Reply #6 on:** October 18, 2013, 10:13:01 pm »

Hi,

deactivated, the same.

Michel

qwerty · « **Reply #7 on:** October 19, 2013, 12:01:51 am »

I haven't heard of such a behavior for a local EAP. So I have not advise. Probably you should report to Sparx support.

q.

Geert Bellekens · « **Reply #8 on:** October 21, 2013, 05:41:28 pm »

I've seen such behavior when you have elements with lots and lots of features.

Say you have an element with 2000 operations or something like that.

Or if you just have a huge model. I think there are limits to the model size that can be comfortably accommodated in a .eap file.

You can also try to do a model transfer to a new .eap file. That might help.

Geert

Sparx Systems Forum

News: