Author Topic: Legend is not saved (Read 6594 times)

Wilbert · « **on:** January 27, 2015, 07:11:42 pm »

Hi all,

When I include a legend within a diagram, the contents of the legend are not saved. If I save, exit and reopen my Project, the legend is still there but empty. Is this a known issue (could not find any references to it), or am I doing something wrong?

Gr., Wilbert

qwerty · « **Reply #1 on:** January 27, 2015, 08:42:33 pm »

Haven't heard that, but you should state your EA version.

q.

Wilbert · « **Reply #2 on:** January 28, 2015, 09:14:18 pm »

Sorry, you're right.

I use the Corporate Edition, version 11.1.1111 (build 1111)

Gr., Wilbert

qwerty · « **Reply #3 on:** January 28, 2015, 09:21:22 pm »

Just tried that and I had no issue. Does it happen with all repositories? Have you tried with a fresh empty EAP?

q.

Wilbert · « **Reply #4 on:** January 28, 2015, 11:23:07 pm »

Hmm, I tried it with a fresh project and now it works OK. But the project that I had the issue with, still does not work. Write -> Close EA -> Open results in empty Legends...

Gr., Wilbert

qwerty · « **Reply #5 on:** January 29, 2015, 01:49:42 am »

Try a project integrity check. That helps sometimes. If not: contact Sparx support directly per mail.

q.

Takeshi K · « **Reply #6 on:** January 29, 2015, 11:46:08 am »

Just for your information, I know the same behavior when I use JET 3.5-based EAP file. If it were the same issue, copying your project file to JET 4.0-based EAP (or maybe FEAP) could solve the issue.

HTH,

Sparx Systems Forum

News: